News_News_Jiangyin Yida Machinery Manufacturing Co. LTD

Warmly celebrate the official launch of Jiangyin Yida Machinery Manufacturing Co. LTD website

Jiangyinyidamachineryco.,LTD.,foundedin2008,isaprofessionalmanufacturerofhydraulicendofoilfracturingtruckandrelatedsupportingmachineryproducts.Thecompanyislocatedinthebeautifulnationalhealthcityjiangy

2019-06-28

Introduction of electro-hydraulic reversing valve

Electro-hydraulic directional control valve is composed of electromagnetic directional control valve and hydraulic directional control valve, in which the electromagnetic directional control valve is used to change the direction of flow to the hydraulic directional control valve to change the working position of the valve core. Call it the pilot valve; Hydraulic changeover valves are used to control actuators in hydraulic systems. This kind of control mode can control the direction of large flow in the main oil circuit by using the suction force of small electromagnet, which is suitable for the hydraulic system with large flow.
Electro-hydraulic directional control valve of the main valve core to spring to neutralize how the hydraulic pressure in two ways, elected in spring, the guide valve should choose function of Y type electromagnetic directional valve, to ensure that when the main valve core in the median, on both ends of the control oil chamber of hydraulic oil to the fuel tank keep in unloading condition, easy to keep the main valve core in the middle position. When using hydraulic pressure, the pilot valve should choose the P type electromagnetic directional valve, to ensure that the main valve core in the middle, the two ends of the hydraulic control oil, the main valve core pressure balance at both ends, keep in the middle.
The control oil inlet mode of the electro-hydraulic directional control valve is divided into internal oil inlet and external oil inlet, and the oil return mode also has internal oil return and external oil return, which can be flexibly selected according to the actual needs of the system.

2019-06-26

Hydraulic electromagnetic directional valve structure and working principle

Valve body and sliding spool are the main body of hydraulic solenoid directional valve. In the solenoid directional valve body has a number of different oil interface, each oil interface and the corresponding ring groove on the valve body, there are several oil interface is called several valve. Hydraulic machinery generally USES four - way hydraulic electromagnetic directional valve. The spool can stay in different working positions after moving, the spool has several working positions called a few valves. If C2 function solenoid directional valve valve core has 3 working positions, there are 4 oil interface on the valve body, the valve is called three four-way solenoid directional valve. Different oil line interface is through the working position of the valve core to achieve on or off.

2019-06-26

Information

News

Warmly celebrate the official launch of Jiangyin Yida Machinery Manufacturing Co. LTD website

Introduction of electro-hydraulic reversing valve

Hydraulic electromagnetic directional valve structure and working principle